top of page

Get heat loss calculation and comparison sheet to find and select most suitable insulation materials for your use. Heat Insulation made of Fire Resistant Insulation Inorganic Mineral Fibers at Wedge India for walls, roofs, tank, foundations, floors cold and hot insulation.

 

To calculate heat loss through a material or building element, we use the heat transfer equation based on conduction. The amount of heat lost depends on several factors, including the U-value of the material, the surface area, the temperature difference between inside and outside, and the time over which the heat loss occurs.

 

Steps to Calculate Heat Loss

1. Determine the U-value

• The U-value measures the thermal performance of the material or structure. You may already have this value, or you can calculate it by taking the inverse of the R-value of the insulation.

2. Measure the surface area

• Find the total surface area (A) of the building element where heat loss occurs. This could be the area of a wall, roof, or window.

3. Identify the temperature difference (ΔT)

• This is the difference between the inside temperature and the outside temperature.

4. Calculate the heat loss (Q)

• Multiply the U-value by the surface area and the temperature difference.

 

Heat Loss Over Time

To calculate the heat loss over time (in hours), simply multiply by the number of hours

 

Key Considerations

The lower the U-value, the lower the heat loss, as the material has better insulation properties.

Heat loss also depends on factors like air infiltration and radiation through windows, which may require additional calculations.

 

Insulation MaterialHeat Loss (Watts) at ΔT = 20°C and A = 1 m²
WedGel Aerogel1.75
Wedge FSMP Microporous1.78
Closed-Cell Spray Polyurethane Foam (SPF)3.08
Polyisocyanurate (PIR)3.33
Extruded Polystyrene (XPS)4.00
Expanded Polystyrene (EPS)5.00
Wood Fiber5.26
Mineral Wool5.41
Open-Cell Spray Polyurethane Foam (SPF)5.41
Cork5.56
Cellulose5.71
Cotton (Denim)5.71
Sheep’s Wool5.71
Fiberglass6.25
Calcium Silicate6.67
Vermiculite and Perlite8.00
Straw Bale13.79

 

Would you like to calculate the heat loss for a specific structure or material? You can provide the U-value, surface area, and temperature difference, and we can assist with the calculation!

Heat Loss Calculation

  • At Wedge we manufacture and supply good quality wide range of Insulation Products from India, UK, and China.

    Learn more about Insulation products available at Wedge India and get Technical Datasheet, Brochure click the link below:

    Insulation Products

    • Calcium Silicate
    • Ceramic Fiber Blanket
    • Ceramic Fiber Cloth
    • Aluminium Foil-Coated Ceramic Fiber Cloth
    • Ceramic Fiber Boards
    • Expanded polystyrene
    • Spray foam insulation
    • Millboard Insulation and Gaskest
    • Roof insulation 
    • Fire Wool
    • Steel Sandwich PUF Panel
    • Steel Sandwich PIR Panel
    • Steel Sandwich Mineral Wool Panel
    • Aluminium Sandwich PUF Panel
    • Aluminium PIR Panel
    • Calcium Silicate Sandwich Mineral Wool Panel
    • Sandwich PUF Panel
    • High Density Rockwool Board
    • Polymer Mortar XPS Tile Backer Board
    • Acoustic insulation
    • Perlite Roof Insulation Boards
    • Expanded Perlite Boards
    • Un-Expanded Perlite Ore
    • Rock wool insulation
    • Noise Reduction Insulation
    • Fiberglass insulation
    • Acoustic Insulation Materials
    • Sound insulation for walls
    • Thermal insulation
    • Mineral wool
    • Fumed Silica Brick
    • Fumed Silica Adhesive Paste
    • Acoustical ceiling
    • Sound insulation foam
    • Polyurethane foam spray
    • Heat insulation 
    • Expanded Polystyrene (EPS) insulation
    • Insulation millboard
    • Cavity wall insulation
    • Aerogel
    • Aluminium foil Coated Ceramic Blanket
    • Aluminium foil Coated Ceramic Fiber Paper
    • Nitrile rubber insulation
    • Aluminium Foil Coated Rock Wool
    • Insulation board
    • Wall insulation
    • Window insulation
    • Cellulose insulation